|
|
       |
| |
| |
| |
| News |
| |
 |
1 piece used Mixing Mill 2100 mm with periphery drilled rolls, No. 1-215
1 piece used Mixing Mill 2100 mm with periphery drilled rolls, No. 1-215
|
|
| Make: |
BUZULUK |
| Type: |
2100 x 660 mm Ø
periphery drilled rolls |
|
|
| Rolls: |
2100 mm / 84" roll length x 660 mm / 26" roll diameter
cylindrical, surface even, periphery drilled |
|
|
| Roll cooling: |
by periphery drills and rotary union |
| Roll bearings: |
roller bearings |
| Roll adjustment: |
electric |
| Friction: |
1,22 |
| Roll safety: |
by break plate |
|
|
| Material guides: |
available / adjustable middle cheek possible |
|
|
| Motor: |
160 kW |
|
|
| Gearbox: |
spur gear 364 kW |
|
|
| Base plate: |
NEW |
|
|
| Control: |
NEW Siemens S7 incl. frequency converter 160 kW ATV71 or
according to customer request |
• Mixing Mill in complete overhauling at the moment
• Safety according on "CE-Standard"
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
Mat Preforming Line, No. 2-154
Mat Preforming Line, No. 2-154
|
|
consisting of:
1 piece used 3-Roll-Calender
| Make: |
Reinartz |
| Type: |
3-roll-"I"-calender |
| Rolls: |
50" (1250 x 500 mm) |
|
|
| Roll cooling: |
by rotary union and hollow chambers |
| Roll bearing: |
friction bearing |
|
|
| Lubrication: |
grease loss lubrication manual with cooling |
|
|
| Gap adjustment: |
roll gap electrically adjustable, by roll 1 and 3
size of gap collected by electrical distance measurement |
|
|
| Drive: |
Baumüller DC motor, 90 kW, 1500 rpm
Labod power converter |
|
|
| Electric Controls: |
Siemens S5 115U, line control |
|
|
| Frame: |
calender completely installed on steel frame with vibration elements, set-up ground level |
|
|
used cooling bath and powdering unit
| Dimension: |
approx. 1000 x 600 x 600 mm |
|
|
used cooling roll unit with 4 piece cooling rolls 36"
| Rolls: |
900 x 600 mm, inside chilled |
|
|
used cutting and palletizing unit
| Dimension: |
approx. 2000 x 2000 mm
|
|
|
~ incl. sheets- and length adjustment
~ incl. turning unit for mat
~ incl. take-up unit for sheets
~ detailed description of operation on request
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
used Mixing Mill 1000 mm with periphery drilled rolls, No. 1-142
used Mixing Mill 1000 mm with periphery drilled rolls, No. 1-142
|
|
| Make: |
COMERIO ERCOLE |
|
|
|
| Type: |
Mixing Mill |
|
|
| Rolls: |
1000 mm roll length x 400 mm roll diameter
rolls cylindrical |
|
|
| Roll cooling: |
by periphery drills in both rolls and rotary union |
|
|
| Roll bearings: |
friction bearings |
| Roll adjustment: |
electrical |
| Roll speed: |
27,79 m/min front roll
23,75 m/min rear roll
|
| Friction: |
1,17 / 1:1 - friction switchable |
| Guiding cheeks: |
hinged |
|
|
| Brake: |
band brake |
|
|
| Gear box: |
spur gear Comerio |
|
|
| Motor: |
380 V, 1480 rpm, 55 kW |
|
|
| Controls: |
contactor control, with operator panel for stockblender |
• incl. Stockblender
• Mixing Mill on base plate
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
MODERN 3-roll-"I"-Calender, No. 1949
MODERN 3-roll-"I"-Calender, No. 1949
|
|
| Make: |
BERSTORFF |
|
|
| Type: |
3-roll-"I" – drive by cardan shafts for producing rubber plates, frictioning of textures, facing of textures, doubling of plates and textures |
|
|
| Rolls: |
1.650 mm roll length x 600 mm roll diameter |
|
|
| Roll Cooling: |
by rotary unions and hollow chambers |
|
|
| Roll Material: |
550° Brinell die-cast
mirror finish and precision grinding
|
|
|
| Roll Bearing: |
special bronze cast with friction bearing |
| Lubrication: |
circulatory oil lubrication with monitoring system |
|
|
| Roll adjustment: |
roll 2 – fixed
rolls 1 + 3 – parallel / separately adjustable via motorized spindle
|
|
|
| Friction: |
between roll 1 + 2 – 1:1,15 for material feeding
between roll 2 + 3 – switchable by gear
|
|
|
| Tangential Deviation: |
rolls 1 + 3 |
| Prestressing Unit: |
rolls 1 + 2 – to eliminate bearing clearance |
|
|
| Drive: |
DC motor 98 kW, 1470 rpm
special gear with 3 shaft drives for direct coupling to the rolls
all gear-wheels and coupling wheels with high precision arrow teeth
cardan shafts beared in high precision roller bearings
|
|
|
| Electric Controls: |
conventional controls with power converter for motor drive |
|
|
Additional Accessories (included):
• Cutting system
• Doubling system
• Winding / dewinding unit
• 2 pc. spreader rollers
• cooling rolls for 1.650 mm roll length x 600 mm roll diameter
• conveying unit
• winding unit
• swivable feeder
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
used Mixing Mill 1800 mm with periphery drilled rolls, No. 1-112
used Mixing Mill 1800 mm with periphery drilled rolls, No. 1-112
|
|
| Make: |
BERSTORFF / Germany |
|
|
|
| Type: |
1800 mm - MODERN TYPE |
|
|
|
| Year: |
2007 completely overhauled |
|
|
| Rolls: |
1800 mm roll length x 600 mm roll diameter
front roll even
rear roll riffled (2 mm) - could be grinded to even roll |
|
|
| Roll cooling: |
by periphery drills in both rolls |
|
|
| Roll bearings: |
roller bearings |
| Guide shoes: |
pneumatically movable |
| Roll adjustment: |
electric by screw spur gear |
| Roll safety: |
by break plate
|
| Nip display: |
digital, by travel sensor
|
| Roll speed: |
front roll 25,3 m/min / rear roll 28,9 m/min |
| Friction: |
1:1,14 |
|
|
| Brake: |
NEW - pneumatic disc brake (CE conform) |
|
|
| Gear box: |
strong unidrive gear box (direct-drive)
250 kW, 980 / 15 rpm, i=63,92 |
|
|
| Motor: |
according to customer´s |
|
|
| Controls: |
according to customer´s - NEW |
|
|
| Stripe cutter: |
sideways movable, pneumatically pushable |
• Mixing Mill complete overhauled
• General condition excellent
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
used Saltbath-Vulcanisation-Line, No. 1971
used Saltbath-Vulcanisation-Line, No. 1971
|
|
as dipping bath, approx. 30 m
consisting of:
1 piece Extruder, No. 1959
| Make: |
Berstorff |
| Type: |
GE 120 K vac. – 18 D with feeding roll, cold feeded
vacuum zone |
| Barrel: |
with reconditioned feeding roll, vacuum zone |
| Screw: |
120 mm Ø – 18 D length with vacuum part,
Maillever type -
AS GOOD AS NEW |
| Screw rotation: |
approx. 50 1/min max. |
| Head: |
straight head on retractable flange |
| Gear Box: |
Berstorff i=14 : 1
with electric pump for oil circulating lubrication
|
| Drive: |
AS GOOD AS NEW - AC motor 75 kW, 1000 1/min, 6-pole |
| Vacuum pump: |
AS GOOD AS NEW - from Becker |
| Tempering: |
AS GOOD AS NEW - 5 pc. Tempering unit |
| Base plate: |
steel frame |
|
|
1 piece Intake - conveyor belt, No. 1969
| Contact area: |
900 x 250 mm |
| Inclination: |
adjustable |
|
|
1 piece Salt bath, No. 1971
| Material: |
6 mm steel sheets, swiming construction on insulating plate,
entire length is heat insulated
all wet areas built of STAINLESS STEEL or of salt water / water resistent materials |
| Heating: |
via electrical heating coil, easy assembling
temperature messurement via 4 pc. dipped thermocouples |
| Operating: |
25 hatches – seperately to be opened |
| Offtake: |
4 x provided (piping + ventilators nonexisting)
|
ZONE 1 – Dipping Bath
|
| Dipping Bath: |
17 m legth – – via 56 rolls, 215 mm diameter
saltbath container is continous height adjustable electrically
|
ZONE 2 – Cleaning
|
| Blowoff / shaking station: |
for further removal of saltremains,
salt remains are lead back into the salt basin
|
| Preliminary purification: |
1,25 m lenght – washing-up of profile via nozzle |
| Main cleaning: |
4,75 m lenght – via 6 nozzles |
| Clear-wash-tub: |
for final cleaning |
ZONE 3 – Cooling
|
| Cooling bath: |
6 m lenght – with blowoff and shaking station at outlett
|
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
used Saltbath-Vulcanisation-Line, No. 1970
used Saltbath-Vulcanisation-Line, No. 1970
|
|
as sprinkling and dipping bath, approx. 30 m
consisting of:
1 piece Extruder, No. 1961
| Make: |
Troester |
| Type: |
GS 90 / k – 20 D with feeding roll, cold feed,
with vacuum zone
|
| Barrel: |
5 Zones, AS GOOD AS NEW cleaning hatches
|
| Feeding zone / feeding roll: |
very good condition
|
| Screw: |
regular Screw Ø 90 mm x 20 D, coolable – LIKE NEW |
| Screw rotation: |
max. 3-70 1/min
|
| Drive: |
17,4:1 |
| Motor: |
DC-motor 80 kW, 1800 1/min, overhauled |
| Head: |
straight head on retractable flange |
| Vacuum pump: |
LIKE NEW - by Becker |
| Tempering: |
LIKE NEW - 5 St. Tempering unit |
| Base plate: |
LIKE NEW |
|
|
1 piece Intake conveyor belt, No. 1968
| Contact area: |
900 x 250 mm |
| Inclination: |
adjustable |
|
|
1 piece Salt bath, No. 1970
| Material: |
6 mm steel sheets, floating construction on insulating plate, entire length is heat insolated
all wet areas build of STAINLESS STEEL or of salt water / water resistent materials |
| Heating: |
via electric heating coil, easy assembling
temperature messurement by 4 pc. dipped thermo couples
|
| Operation: |
25 hatches – to be opened separately |
| Offtake: |
4 times provided (piping + ventilatoren not existent)
|
ZONE 1 – Sprinkling |
| Sprinkling: |
15 m length - by 2 pc. salt pumps
unit continuosly height adjustable electically
|
ZONE 2 – Dipping Bath |
| Diving bath: |
2,5 m legth - via 10 rolls, Ø 215 mm
unit continuosly height adjustable electically
|
ZONE 3 – Cleaning
|
| Blowoff / shaking station: |
for further removal of salt remains
salt remains are lead back into salt basin
|
| Preliminary purification: |
1,25 m length - diving of profile via rolls
washing-up of profile via nozzle
|
| Main cleaning: |
via 6 pc. nozzle and closed water circulation |
| Clear-wash-tub: |
for final cleaning |
ZONE 4 – Cooling
|
| Cooling bath |
with outlet- and shaking station at the outlet
|
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
|
used / LIKE NEW Microwave - Line, No. 1964
used / LIKE NEW Microwave - Line, No. 1964
|
|
modern Microwave technology combined with hot-air and gas
for profiles maximum size 140 x 50 mm
including fire extinguishing equipment
--- Make TROESTER ---
consisting of:
1 piece Extruder, No. 1963
| Type: |
90 mm x 20 L/D with feeding roll, cold feed,
with vacuum part |
| Barrels: |
feeding 130 x 120 mm /
feeding roll with cooling
|
| Screw: |
90 mm Ø – 20 L/D length with vacuum part
cooling by rotary union |
| Head: |
straight head on sviwel flange, with tempering, outlet 90 mm, tool hydraulically locked, with pressure and temperature sensors
|
| Gear Box: |
Flender spur wheel gear, i=16,4 : 1,
with electric pump for oil circulating lubrication |
| Drive: |
Siemens DC motor B3, 68,5 kW, 1800 (2070) rpm,
460 V, 166 A, with separately driven fan
|
| Vacuum pump: |
Busch 025-132 |
| Tempering: |
6 pc. compact tempering units Weinreich WTD 6 |
| Hydraulic unit: |
Bosch-Rexroth, 1,5 kW |
| Base plate: |
steel frame |
|
|
1 piece combined microwave – hot air – channel, No. 1964
| Type: |
16,6 m / SK03-MW12-HL06-150.60 |
| Profile size: |
max. 140 x 50 mm |
| Feeding/Outlet: |
190 x 65 mm |
| Tape speed: |
21.6 m/min at n1 1380 rpm
26.7 m/min at n2 1680 rpm |
| Tension unit: |
pneumatic |
| Covers: |
pneumatically to open and close |
|
|
|
| ZONE 1 – Hot Air
|
| Length: |
3 m |
| Heating: |
by gas-shock |
| ZONE 2 – UHF
|
| Length: |
6 m |
| Heating: |
magnetrons 6 x 2 kW – 2450 MHz, combined with hot air |
| ZONE 3 – Hot Air
|
| Length: |
6 m |
| Heating: |
by Gas - hot air |
|
|
1 piece Hot Air Channel, No. 1965
| Type: |
10 m / HLK09 150.60/G |
| Profile size: |
max. 140 x 50 mm |
| Heating: |
by Gas - hot air |
|
|
1 piece Cooling Channel, No. 1966
| Type: |
7,5 m |
| Feeding / Outlet: |
max. 155 x 100 mm mm |
| Cooling: |
by water with sprinkler and dipping tank |
| Blow off unit: |
8 pc. blow off heads over take off tape |
| Drive: |
own drive – no caterpillar necessary |
|
|
1 piece fire extinguishing equipment
MORE INFORMATION AND DETAILED OFFER ON REQUEST!
| |
| |
| Our Services |
| |
| - Purchase and Sale of machines for the rubber, PVC and PUR industries |
| - Reconditioning / repairs of used machines of such fields |
| - Dismantlings / assemblies |
| |
|
| |
| Contact us |
| |
DEGUMA Schütz GmbH
Industriestrasse 4 - 8
D-36419 GEISA |
Phone:
+49(0)36967/761-0 |
Fax:
+49(0)36967/761-22 |
e-mail:
deguma@deguma.com |
|
|
| | | | | | | | |
