Mixing Mills | Calender | Extruder | Mixers | Presses | Compounder

• Machine Index
• Your Notepad

Por categoría

• Mixing Mills
• Calender
• Mixers
• Extruder
• Presses
• Cutting Machines
• Laboratory Equipment
  • Mixing Mills
  • Calenders
  • Kneader and Mixers
  • Extruders
  • Presses
  • Others
• Extrusion Lines
• Special Equipement
• Mould Carriers and Metering Machines
• New machines

Por el fabricante

Machines by Category

Laboratory Equipment

Picture	Info	Detail 1	Detail 2
	8-577 Laboratory Mixing Mill WN R3 450 x 200 Fabricante: TroesterNo: 8-577	Roll length: 450 mm	Roll diameter: 200 mm	+
	8-574 Laboratory Mixing Mill 300 x 150 Fabricante: David BridgeNo: 8-574	Roll length: 300 mm	Roll diameter: 150 mm	+
	8-503 Laboratory Mixing Mill WNU2 350 x 150 Fabricante: TroesterNo: 8-503	Roll length: 350 mm	Roll diameter: 150 mm	+
	8-381 Laboratory Mixing Mill 220 x 110 Fabricante: SchwabenthanNo: 8-381	Roll length: 220 mm	Roll diameter: 110 mm	+
	8-1986 Laboratory Mixing Mill 300 x 150 Fabricante: KleinewerfersNo: 8-1986	Roll length: 300 mm	Roll diameter: 150 mm	+
	8-409 Laboratory Mixing Mill 350 x 150 Fabricante: BerstorffNo: 8-409	Roll length: 350 mm	Roll diameter: 150 mm	+
	8-312 Laboratory Mixing Mill WLA3 450 x 200 Fabricante: TroesterNo: 8-312	Roll length: 450 mm	Roll diameter: 200 mm	+
	8-422 Laboratory Mixing Mill 550 x 220 Fabricante: BerstorffNo: 8-422	Roll length: 550 mm Working width: 450 mm	Roll diameter: 220 mm	+
	8-176 Laboratory Mixing Mill 600 x 300 Fabricante: BuzulukNo: 8-176	Roll length: 600 mm	Roll diameter: 300 mm	+
	Laboratory Calender 4-roll F-type No. 8-601 Fabricante: SchwabenthanNo: 8-601	Roll length: 400 mm	Roll diameter: 150 mm	+
	8-545 Laboratory Calender 2-roll I-type Fabricante: SchwabenthanNo: 8-545	Roll length: 350 mm	Roll diameter: 150 mm	+
	8-423 Laboratory Calender 3-roll, modular design Fabricante: CollinNo: 8-423	Roll length: 450 mm	Roll diameter: 250 mm	+
	8-1835 Laboratory Calender 4-roll F-type Fabricante: BerstorffNo: 8-1835	Roll length: 350 mm	Roll diameter: 150 mm	+
	8-488 Laboratory Dispersion Kneader LUK 0,5 Fabricante: Werner PfleidererNo: 8-488	1,25 l total volume 0,8 l useful volume	2-wing rotors, tangential	+
	8-370 Plougshare Mixer FM50/1ZF Fabricante: LödigeNo: 8-370	50 l mill chamber volume (made of stainless steel)	Feeding opening Ø 200 mm	+
	8-474 Twin-screw Extruder ZK 50 Fabricante: CollinNo: 8-474	Screw diameter: 2 x 50 mm	Screw length: 12 D	+
	8-564 Laboratory Press Fabricante: BerstorffNo: 8-564	Platen size: 300 x 280 mm	Closing force: 415 kN	+
	8-514 Laboratory Press Model 150-C Fabricante: CarverNo: 8-514	Platen size: 150 x 150 mm	Closing force: 100 kN	+
	8-530 Heating Cabinet Fabricante: MelagNo: 8-530	Temperature range: 60 to 220°C	Chamber size: 400 x 300 x 500 mm	+
	8-522 Laser-Extensometer Fabricante: MonsantoNo: 8-522	Temperature range: Up to 270°C	Chamber size: 250 x 250 x 600 mm	+
	8-521 Analysing Scale Fabricante: MettlerNo: 8-521	Weighing range: Up to 160 g	Scaling: 10 mg	+
	8-518 Climate testing cabinet VTRK 300 Fabricante: HeraeusNo: 8-518	Temperature range: 10 to 90°C	Humidity range: 10 to 95% rel. humidity	+
	8-517 Pneumatic Hollow Die Punch Fabricante: CEASTNo: 8-517	Load on die: 40 kN at 6 bar	Stroke: 20 mm	+
	8-516 Pneumatic Hollow Die Punch Fabricante: ZwickNo: 8-516	Load on die: 40 kN at 6 bar	Stroke: 18 mm	+
	8-515 Heating Cabinet KTG 800 Fabricante: HeraeusNo: 8-515	Temperature range: Up to 105°C	Chamber size: 780 x 510 x 380 mm	+
	8-513 Screw Feeder VDS/A-G Fabricante: BrabenderNo: 8-513	Output capacity: 230 kg/h	Volumetric dosing system	+
	8-509 Heating chamber Fabricante: Pickstone EquipmentNo: 8-509	Temperatures up to 300°C	For up to 25 samples	+
	8-508 Tensometer T10 Fabricante: MonsantoNo: 8-508	Testing width: 470 mm	Speed range: 0,5 - 1000 mm/min	+
	8-507 DIN Absrasion Tester Fabricante: FrankNo: 8-507	Type 564 C		+
	8-506 Ozone Generation System Fabricante: HampdenNo: 8-506			+
	8-501 Rheometer MDR Fabricante: GöttfertNo: 8-501	50 Schwingungen pro Minute		+
	8-147 Measurement and Profile Projector Type JUNIOR Fabricante: WerthNo: 8-147	Measuring range: X=200mm; Y=150mm	Measurement of 2D parts And drawing comparison	+
	8-145 Manual Hollow Die Punch Fabricante: ZwickNo: 8-145	Up to 4 dies	Stroke: 20 mm	+

deutsch | english | français | sspañol