Mixing Mills | Calender | Extruder | Mixers | Presses | Compounder

• Machine Index
• Your Notepad

Par catégorie

• Mixing Mills
• Calender
• Mixers
• Extruder
• Presses
• Cutting Machines
• Laboratory Equipment
• Extrusion Lines
• Special Equipement
• Mould Carriers and Metering Machines
• New machines

Par fabricant

Machines by Category

Special Equipement

Picture	Info	Detail 1	Detail 2
	10-594 Autoclave Type D.2250 L-6000 Fabricant: EngelkeNo: 10-594	2250 x 6000 mm	Capacity: 27.800 l	+
	10-589 Die Change Carriage Fabricant: BAKANo: 10-589	Load: 1000 kg	Stroke: 810 mm	+
	10-493 Preformer RA 250 Fabricant: Werner PfleidererNo: 10-493			+
	4-485 Melt Gearpump type ZW 179-27 Fabricant: BASFNo: 4-485			+
	10-477 Fusing Press Fabricant: MeyerNo: 10-477	Platen size: 800 x 500 mm	Clamping force: 3,3 N/cm²	+
	10-471 Talcum powder dosing unit type 2G-100 Fabricant: HUPNo: 10-471			+
	10-470 Bag filling and weighing unit Fabricant: MettlerNo: 10-470	For filling and weighing of bags with granulate	Pneumatically operated clamp for bags	+
	10-466 Vibracooler spiral conveyor Fabricant: JöstNo: 10-466			+
	10-464 Vibracooler spiral conveyor Fabricant: JöstNo: 10-464			+
	10-405 Reverse-osmosis system type Alpha 300S Fabricant: USFNo: 10-405			+
	10-404 Powder Applicator Fabricant: Transporta N.P. ChrudimNo: 10-404			+
	10-402 Belt Weigher Fabricant: Transporta N.P. ChrudimNo: 10-402			+
	10-400 Oil dosing unit Fabricant: Tonava a.s.No: 10-400			+
	10-399 Weighing unit for fillers Fabricant: Transporta N.P. ChrudimNo: 10-399	Weighing range: 0 - 100 kg	Feeding ports: 4 flanges	+
	10-398 Weighing unit for fillers Fabricant: Transporta N.P. ChrudimNo: 10-398	Weighing range: 0 - 50 kg	Feeding ports: 2 flanges	+
	10-397 Weighing unit for fillers Fabricant: Transporta N.P. ChrudimNo: 10-397	Weighing range: 0 - 10 kg	Feeding ports: 1 flanges	+
	10-377 Cooling Rolls Fabricant: UnknownNo: 10-377	Roll lenght: 1600 mm	Roll diameter: 600 mm	+
	10-376 Take-off conveyor Fabricant: UnknownNo: 10-376	Useful width: 930 mm	Useful lenght: 4500 mm	+
	10-354 Chiller Fabricant: Sulzer Escher/MTA/GebhardNo: 10-354			+
	10-328 Heating Cabinet TRUS 60 Fabricant: Keller Ihne+Tesch KGNo: 10-328	Nominal temperature 80-180°C		+
	10-323 Conveyor Fabricant: MA-TechNo: 10-323	Useful width: 550 mm	Useful lenght: 4000 mm	+
	10-320 Oscillating Screen Weston 563 Fabricant: MeloncelliNo: 10-320			+
	10-321 Granulate Hopper-Loader Fabricant: MotanNo: 10-321	Feed rate: 250 kg/h	Capacity: 6 l	+
	10-308 Vibrating Feeder A-35 R Fabricant: VibrantNo: 10-308			+
	10-307 4-headed Drilling Machine BM 04-16 Fabricant: DrechslerNo: 10-307			+
	10-256 Feeding Conveyor Fabricant: RZNo: 10-256	Useful width: 200 mm	Useful lenght: 3150 mm	+
	10-246 Profile-brush with exhaustion Fabricant: DraftexNo: 10-246			+
	10-243 Rotocure AUMA 15 Fabricant: BerstorffNo: 10-243	Working width: Up to 1400 mm	Heating drum diameter: 1500 mm	+
	10-233 Feeding Conveyor/Weigher Fabricant: MeyerNo: 10-233			+
	10-227 Belt weigher SMD 100 Fabricant: Vitkovice TransportaNo: 10-227	Weighing range: 5 to 100 kg	Accuracy: 100 g	+
	10-221 Festooner Fabricant: BuzulukNo: 10-221	Mat size: Max. 1100 x 1100mm		+
	10-196 Carbon black Weigher DBW 3/5-30 F Fabricant: MeyerNo: 10-196	Weighing range: 2 to 30 kg		+
	10-162 Stripe Cooler RSC 1700/1000 Fabricant: PromiconNo: 10-162	Stripe size max. 80 x 10 mm	Capacity: Ca. 300 kg/h	+
	10-1985 Belt Weigher Fabricant: SteimelNo: 10-1985	Weighing range: 12,5 to 250 kg	Conveyor width: 550 mm Conveyor length: 3100 mm	+
	10-1981 Granule Conveyor Fabricant: UnknownNo: 10-1981	Conveyor lenght: 3200 mm	Conveyor width: 85 mm	+
	10-1888 Hydraulic Roll-lift Table Fabricant: LödigeNo: 10-1888	Table height: 300-1200 mm	Lifting power: Max. 1000 kg	+
	10-1872 Water Bath Fabricant: FördertechnikNo: 10-1872	Conveyor width: 450 mm		+
	10-1546 Infrared-Heating Unit Fabricant: HeraeusNo: 10-1546	Heating area: 2200 x 2200 mm	Total power: 78 kW	+
	10-1480 Unwinder W 3.032 Fabricant: BastianNo: 10-1480	Roll diameter: max. 800 mm	Roll weight: max. 1500 kg	+
	10-2622 Rod-Coater ISO-BAR Fabricant: Kohler CoatingNo: 10-2622	Product width: max. 2000 mm	Speed: max. 25 m/min	+

deutsch | english | français | sspañol