DEGUMA Laboratory Presses
P 350 LAB 25T
Automatic high-precision laboratory press with 4 columns for silicone and organic rubber dies production equipped with plates heated by electric resistances. It is suitable for medium hardness compounds.
Characteristics
- Sturdy steel structure processed by CNC machining centre
- Hydraulic control unit composed of: motor, high pressure pump to maintain the working pressure, low pressure pump for raising and lowering solenoid valve, pressure switch for automatic pressure regulation
- PLC and control panel with touch screen
- Vulcanization cycle timer
- Plate opening adjustment during degassing
- Automatic degassing
- Programmable degassing cycles
- 2 PID thermoregulators to maintain uniform temperature
- Pressure gauge indicating plate closing pressure
- Protection door with safety limit switch: prevents reaching the workplates area
- Cycle start button
- Descent button
- Automatic / manual cycle selector
- Main switch
- Emergency button
Technical data
Heating plates dimensions
13.78 x 13.78"
Opening between plates
9.4"
Operating pressure
250 bar
Adjustable temperature
68 - 392°F
Maximum clamping force
25 TON
Power
4.500 W
Voltage
400 V Three-phase
Frequency
50/60 Hz
Dimensions
38 x 29.1 x 64.6"
Weight
725 kg
Noise output
< 65 dB
P 350 LAB 40T
Automatic high-precision laboratory press with 4 columns for silicone and organic rubber dies production equipped with plates heated by electric resistances. It is suitable for medium hardness compounds.
Characteristics
- Sturdy steel structure processed by CNC machining centre
- Hydraulic control unit composed of: motor, high pressure pump to maintain the working pressure, low pressure pump for raising and lowering solenoid valve, pressure switch for automatic pressure regulation
- PLC and control panel with touch screen
- Vulcanization cycle timer
- Plate opening adjustment during degassing
- Automatic degassing
- Programmable degassing cycles
- 2 PID thermoregulators to maintain uniform temperature
- Pressure gauge indicating plate closing pressure
- Protection door with safety limit switch: prevents reaching the workplates area
- Cycle start button
- Descent button
- Automatic / manual cycle selector
- Main switch
- Emergency button
Technical data
Heating plates dimensions
13.78 x 13.78"
Opening between plates
9.4"
Operating pressure
250 bar
Adjustable temperature
68 - 392°F
Maximum clamping force
40 TON
Power
4.500 W
Voltage
400 V Three-phase
Frequency
50/60 Hz
Dimensions
38 x 29.1 x 64.6"
Weight
790 kg
Noise output
< 65 dB
P 350 LAB H&C
High precision automatic 4-column laboratory press for the production of thermoplastic material specimens. Equipped with two plate groups: the upper one for the heating cycle and the lower one for mould cooling.
Characteristics
- Sturdy steel structure machined by CNC work center
- Hydraulic control unit, consisting of: motor, high pressure pump to maintain the working pressure, low pressure pump for raising and lowering solenoid valve, pressure switch for automatic pressureregulation
- PLC and control panel with touch screen for the regulation and display of all working parameters
- Double pressure cycle: first phase of pre-compression, second phase of compression
- Lower plate group prepared for coolant passage
- ON/OFF solenoid valve for coolant passage
- Adjustment of plate opening during degassing
- Automatic and programmable degassing cycles
- 2 PID thermoregulators to maintain uniform temperature
- Protection door with safety limit switch: prevents reaching the work surface area
- Cycle start button
- Descent button
- Automatic / manual cycle selector
- Emergency button
- Main switch
Technical data
Heating plates dimensions
13.78 x 13.78"
Opening between plates
100 mm superior / 80 mm inferior
Operating pressure
250 bar
Adjustable temperature
68 - 482°F
Maximum clamping force
25 / 40 TON
Power
4.500 W
Voltage
400 V Three-phase
Frequency
50/60 Hz
Dimensions
38 x 29.1 x 64.6"
Weight
25 T: 1.786 lbs / 40 T: 2.050 lbs
Noise output
< 65 dB
P 350 LAB X2
High precision vulcanizing press with double shelf for the production of elastomeric and thermoplastic specimens. It can also be used for the production of industrial gaskets and stamps.
Characteristics
- Sturdy steel structure processed by CNC machining centre
- Hydraulic control unit composed of: motor, high pressure pump to maintain the working pressure, low pressure pump for raising and lowering solenoid valve, pressure
witch for automatic pressure regulation - Double work plate group
- PLC and control panel with touch screen
- Vulcanization cycle timer
- Plate opening adjustment during degassing
- Automatic degassing
- Programmable degassing cycles
- 4 PID thermoregulators to maintain uniform temperature
- Pressure gauge indicating plate closing pressure
- Protection door with safety limit switch: prevents reaching the workplates area
- Cycle start button
- Descent button
- Automatic / manual cycle selector
- Main switch
- Emergency button
Technical data
Heating plates dimensions
13.78 x 13.78"
Opening between plates
3.15"
Operating pressure
250 bar
Adjustable temperature
68 -392°F
Maximum clamping force
25 / 40 TON
Power
7.500 W
Voltage
400 V Three-phase
Frequency
50/60 Hz
Dimensions
38 x 29.1 x 64.6"
Weight
25 T: 1.786 lbs / 40 T: 2.050 lbs
Noise output
< 65 dB
P 500 LAB 100T
High precision automatic 4-column laboratory press for plastic compounds, composite wood and silicone and organic rubber equipped with plates heated by electric resistances.
Characteristics
- Sturdy steel structure processed by CNC machining centre Hydraulic control unit composed of: motor, high pressure pump to maintain the working pressure, low pressure pump for raising and lowering solenoid valve, pressure switch for automatic pressure regulation
- PLC and control panel with touch screen
- Vulcanization cycle timer
- Plate opening adjustment during degassing
- Automatic degassing
- Programmable degassing cycles
- 2 PID thermoregulators to maintain uniform temperature
- Pressure gauge indicating plate closing pressure
- Protection door with safety limit switch: prevents reaching the workplates area
- Cycle start button
- Descent button
- Automatic / manual cycle selector
- Main switch
- Emergency button
Technical data
Heating plates dimensions
19.6 x 19.6"
Opening between plates
13.8"
Operating pressure
250 bar
Adjustable temperature
68 -392°F
Maximum clamping force
100 TON
Power
9.000 W
Voltage
400 V Three-phase
Frequency
50/60 Hz
Dimensions
68,9 x 47.2 x 37.4"
Weight
3.439 lbs
Noise output
< 65 dB
P 600 LAB 100T
High precision automatic 4-column laboratory press for plastic compounds, composite wood and silicone and organic rubber equipped with plates heated by electric resistances.
Characteristics
- Sturdy steel structure processed by CNC machining centre Hydraulic control unit composed of: motor, high pressure pump to maintain the working pressure, low pressure pump for raising and lowering solenoid valve, pressure switch for automatic pressure regulation
- PLC and control panel with touch screen
- Vulcanization cycle timer
- Plate opening adjustment during degassing
- Automatic degassing
- Programmable degassing cycles
- 2 PID thermoregulators to maintain uniform temperature
- Pressure gauge indicating plate closing pressure
- Protection door with safety limit switch: prevents reaching the workplates area
- Cycle start button
- Descent button
- Automatic / manual cycle selector
- Main switch
- Emergency button
Technical data
Heating plates dimensions
23.6 x 31.5"
Opening between plates
13.8"
Operating pressure
250 bar
Adjustable temperature
68 -392°F
Maximum clamping force
100 TON
Power
9.000 W
Voltage
400 V Three-phase
Frequency
50/60 Hz
Dimensions
52 x 43.3 x 66.9"
Weight
5.798 lbs
Noise output
< 65 dB